Difference between revisions of "Installing/Lulu"
From GalliumOS Wiki
(→Custom BIOS firmare) |
(→Installing GalliumOS on the Dell Chromebook 13 7310 (Lulu)) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 4: | Line 4: | ||
=== Download and Write GalliumOS to USB === | === Download and Write GalliumOS to USB === | ||
# Download the appropriate iso from [https://galliumos.org/download.html here]. For this tutorial, you’ll need the Chromebook Broadwell ISO. | # Download the appropriate iso from [https://galliumos.org/download.html here]. For this tutorial, you’ll need the Chromebook Broadwell ISO. | ||
| − | # | + | # Follow the instructions found [https://galliumos.org/wiki/index.php?title=Installing/Creating_Bootable_USB here] to create the install media. |
| − | |||
| − | |||
=== Backup data === | === Backup data === | ||
| − | If you have any data stored locally on the | + | If you have any data stored locally on the Chromebook that you would like to keep, backup the data to either a USB drive or to Google Drive. '''Enabling Developer Mode will wipe your device.''' |
| − | === Enable Developer Mode and | + | === Enable Developer Mode and Install Firmware Update === |
| − | # Boot into recovery by press and hold the | + | # Boot into recovery by press and hold the [ESC] + [Refresh] keys, then press the power button. |
| − | # At the Recovery screen press | + | # At the Recovery screen press [CTRL+D] to enable Developer Mode. It will ask you to confirm (usually by pressing [enter]). After confirmation, it will transition the system to Developer Mode, wiping all user data from the device; this will take about 5 minutes to complete. |
| − | # | + | # Afterwards, you’ll see the white Developer Mode boot screen. Press [CTRL+D] to boot into ChromeOS Developer Mode (or it will boot automatically after 30s and beeping twice). |
| − | # Connect to the Internet and accept the terms and agreements. You don’t have to login to ChromeOS using your account (you can if you want to, but I didn’t). Login as Guest and open up a Crosh session by pressing | + | # Connect to the Internet and accept the terms and agreements. You don’t have to login to ChromeOS using your account (you can if you want to, but I didn’t). Login as Guest and open up a Crosh session by pressing [CTRL+ALT+T]. Type <code>shell</code> and hit enter to open bash. The prompt should look like this: <code>chronos@localhost / $</code><br> |
| − | |||
| − | |||
| − | |||
You’re now ready to flash your Chromebook. | You’re now ready to flash your Chromebook. | ||
| − | # In the | + | # In the shell terminal, enter the following command:<code><nowiki>cd; curl -L -O https://mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh</nowiki></code> |
| − | ## | + | # Select the option to Install/Update the RW_LEGACY firmware (note: this is completely safe / enabled by design). This will also set the necessary Developer Mode boot flags to enable Legacy Boot mode.<br> |
| − | # | + | #*When prompted to default to booting from USB, select 'N.' This will prevent boot from hanging if you have a non-bootable USB/SD device connected/inserted. |
| + | #*You can visit [https://mrchromebox.tech/#fwscript MrChromebox's site] for a more detailed explanation and options for using the Firmware Utility Script | ||
| + | # Quit the script (q) when the firmware update is complete. | ||
=== Install/Upgrade the SSD Drive === | === Install/Upgrade the SSD Drive === | ||
| − | If you are contemplating upgrading your SSD before installing GalliumOS, here is how you do it: | + | If you are contemplating upgrading your SSD before installing GalliumOS, this is the time to do so, and here is how you do it: |
* [[Hardware/Lulu/SSD|Upgrade SSD on Dell Chromebook 13 7310 (Lulu)]] | * [[Hardware/Lulu/SSD|Upgrade SSD on Dell Chromebook 13 7310 (Lulu)]] | ||
| + | * Note: this is a good time to remove the firmware write-protect screw, so you can set the Chromebook to automatically boot GalliumOS. It's also necessary if you want to use a different firmware option than RW_LEGACY. | ||
=== Boot from USB === | === Boot from USB === | ||
# Reboot your Chromebook | # Reboot your Chromebook | ||
| − | # Press | + | # Press [CTRL+L] at the Developer Mode boot screen (scary white screen) to boot in Legacy Boot Mode, via SeaBIOS. |
| − | # Press the ESC key when you see the prompt to do so. You’ll now be in the boot menu.(If you don’t press ESC in time just reboot and do it again.) | + | # Press the [ESC] key when you see the prompt to do so. You’ll now be in the boot menu.(If you don’t press ESC in time just reboot and do it again.) |
# At the boot menu you’ll see your boot options. Select to boot from USB. | # At the boot menu you’ll see your boot options. Select to boot from USB. | ||
# The GalliumOS boot options are: "GalliumOS Live Image and Installation" and "GalliumOS CLI". You want option number one for testing and installing. The second option (CLI) is used for a non-graphical rescue/administration boot. | # The GalliumOS boot options are: "GalliumOS Live Image and Installation" and "GalliumOS CLI". You want option number one for testing and installing. The second option (CLI) is used for a non-graphical rescue/administration boot. | ||
# Test GalliumOS. Explore until you’re sure everything works fine. If you decide to install GalliumOS (and why wouldn’t you?), just launch "Install GalliumOS" from the Desktop shortcut. There’ll be a few prompts during the installation process. | # Test GalliumOS. Explore until you’re sure everything works fine. If you decide to install GalliumOS (and why wouldn’t you?), just launch "Install GalliumOS" from the Desktop shortcut. There’ll be a few prompts during the installation process. | ||
| − | === | + | === Firmware Options === |
| − | If you want to get rid of the scary white screen which comes up at boot and having to hit | + | If you want to get rid of (or at least minimize) the scary white screen which comes up at boot, and skip having to hit [CTRL+L] every time, you can do so by setting the firmware boot flags (GBB Flags) using the Firmware Utility script. Alternately, you can also install custom Full ROM firmware which boots directly into Legacy Boot mode. See [[Firmware]]. |
| − | |||
| − | ''' | + | * '''Note:''' Some types of custom firmware ("Full ROM" or BOOT_STUB variants) will remove the ability to boot into ChromeOS, so they aren't applicable for dual boot setups. |
=== Success === | === Success === | ||
| Line 48: | Line 45: | ||
=== Sources === | === Sources === | ||
| − | https:// | + | https://mrchromebox.tech |
https://galliumos.org/wiki/index.php?title=Installing/Preparing | https://galliumos.org/wiki/index.php?title=Installing/Preparing | ||
https://wiki.galliumos.org/Support/Broadwell | https://wiki.galliumos.org/Support/Broadwell | ||
Latest revision as of 10:20, 2 November 2016
Contents
Installing GalliumOS on the Dell Chromebook 13 7310 (Lulu)
This tutorial is written in sections. It's easier to follow and manage this way. (This tutorial does NOT explain how to dual boot ChromeOS and GalliumOS.)
Download and Write GalliumOS to USB
- Download the appropriate iso from here. For this tutorial, you’ll need the Chromebook Broadwell ISO.
- Follow the instructions found here to create the install media.
Backup data
If you have any data stored locally on the Chromebook that you would like to keep, backup the data to either a USB drive or to Google Drive. Enabling Developer Mode will wipe your device.
Enable Developer Mode and Install Firmware Update
- Boot into recovery by press and hold the [ESC] + [Refresh] keys, then press the power button.
- At the Recovery screen press [CTRL+D] to enable Developer Mode. It will ask you to confirm (usually by pressing [enter]). After confirmation, it will transition the system to Developer Mode, wiping all user data from the device; this will take about 5 minutes to complete.
- Afterwards, you’ll see the white Developer Mode boot screen. Press [CTRL+D] to boot into ChromeOS Developer Mode (or it will boot automatically after 30s and beeping twice).
- Connect to the Internet and accept the terms and agreements. You don’t have to login to ChromeOS using your account (you can if you want to, but I didn’t). Login as Guest and open up a Crosh session by pressing [CTRL+ALT+T]. Type
shelland hit enter to open bash. The prompt should look like this:chronos@localhost / $
You’re now ready to flash your Chromebook.
- In the shell terminal, enter the following command:
cd; curl -L -O https://mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh - Select the option to Install/Update the RW_LEGACY firmware (note: this is completely safe / enabled by design). This will also set the necessary Developer Mode boot flags to enable Legacy Boot mode.
- When prompted to default to booting from USB, select 'N.' This will prevent boot from hanging if you have a non-bootable USB/SD device connected/inserted.
- You can visit MrChromebox's site for a more detailed explanation and options for using the Firmware Utility Script
- Quit the script (q) when the firmware update is complete.
Install/Upgrade the SSD Drive
If you are contemplating upgrading your SSD before installing GalliumOS, this is the time to do so, and here is how you do it:
- Upgrade SSD on Dell Chromebook 13 7310 (Lulu)
- Note: this is a good time to remove the firmware write-protect screw, so you can set the Chromebook to automatically boot GalliumOS. It's also necessary if you want to use a different firmware option than RW_LEGACY.
Boot from USB
- Reboot your Chromebook
- Press [CTRL+L] at the Developer Mode boot screen (scary white screen) to boot in Legacy Boot Mode, via SeaBIOS.
- Press the [ESC] key when you see the prompt to do so. You’ll now be in the boot menu.(If you don’t press ESC in time just reboot and do it again.)
- At the boot menu you’ll see your boot options. Select to boot from USB.
- The GalliumOS boot options are: "GalliumOS Live Image and Installation" and "GalliumOS CLI". You want option number one for testing and installing. The second option (CLI) is used for a non-graphical rescue/administration boot.
- Test GalliumOS. Explore until you’re sure everything works fine. If you decide to install GalliumOS (and why wouldn’t you?), just launch "Install GalliumOS" from the Desktop shortcut. There’ll be a few prompts during the installation process.
Firmware Options
If you want to get rid of (or at least minimize) the scary white screen which comes up at boot, and skip having to hit [CTRL+L] every time, you can do so by setting the firmware boot flags (GBB Flags) using the Firmware Utility script. Alternately, you can also install custom Full ROM firmware which boots directly into Legacy Boot mode. See Firmware.
- Note: Some types of custom firmware ("Full ROM" or BOOT_STUB variants) will remove the ability to boot into ChromeOS, so they aren't applicable for dual boot setups.
Success
You now have GalliumOS installed. How cool is that?
If you run into problems or have any questions, the awesome people at #GalliumOS are happy to help in any way they can. You can also post on /r/galliumos.
Sources
https://galliumos.org/wiki/index.php?title=Installing/Preparing
