Difference between revisions of "Installing"

From GalliumOS Wiki
Jump to: navigation, search
 
(28 intermediate revisions by 8 users not shown)
Line 1: Line 1:
You can install GalliumOS in two different ways:
+
==  General Install Instructions ==
 +
There are two methods for installing GalliumOS:
 +
# '''From an ISO image on a USB drive or SD card'''<br>This method enables you to entirely replace ChromeOS on your Chromebook's internal storage (SSD, eMMC, or NVMe).<br>It also allows the possibility of more complex configurations such as dual-booting alongside Windows or other Linux distributions (these are outside of the scope of these instructions however).
 +
# '''From the ChromeOS command-line using chrx'''<br>This method will configure your device to dual-boot GalliumOS alongside ChromeOS. chrx can install GalliumOS to your Chromebook's internal storage, as well as to external USB/SD devices.
  
* '''From USB or SD media''' downloaded from https://galliumos.org or a nightly build from https://ci.galliumos.org/builds
+
See [[Hardware Compatibility]] to verify the requirements, limitations, and installation options available for your ChromeOS device model.
* '''From the commmand line''' on a ChromeOS virtual terminal, via [https://chrx.org/ chrx]
 
  
Both methods require [http://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Developer Mode] enabled on your ChromeOS device.
+
=== Traditional ISO Install ===
  
 +
The traditional ISO install method allows you to use your entire SSD or HDD for GalliumOS. You will need to use a USB flash drive or SD card, and your Chromebook will need to support either Legacy Boot Mode or have UEFI firmware available. You can even boot the GalliumOS Live image to try out the features of GalliumOS before you decide to install!
  
== From USB or SD media ==
+
# Go to [[Installing/Preparing]] and get your Chromebook ready to run GalliumOS
 +
# [https://galliumos.org/download Download] the appropriate GalliumOS ISO for your device
 +
# Write (or "burn") the ISO to a USB flash drive or an SD card
 +
#* Detailed instructions at [[Installing/Creating Bootable USB]]
 +
# Plug your USB flash drive or SD card into your Chromebook
 +
# Reboot your Chromebook and boot from the USB flash drive or SD card
 +
#* If you have the white "OS verification is OFF" screen, press <code>Ctrl</code>+<code>L</code>
 +
#* If you have installed custom firmware, press Esc at the BIOS screen and select the USB device
 +
# Wait for GalliumOS to boot up. Once in the live environment you can play around with GalliumOS, or you can install it using the Install GalliumOS icon on the desktop
 +
# After reboot, press <code>Ctrl</code>+<code>L</code> to access GalliumOS (this requirement can be bypassed for single-boot on most models, see [[Firmware]])
  
Installing from USB or SD media allows you to use your entire SSD for GalliumOS.
+
'''Important:''' If you choose an ISO install of GalliumOS (thus removing ChromeOS), and choose to use the Legacy Boot Mode of the stock firmware (ie, with the stock or updated RW_LEGACY firmware), and you allow your battery to drain completely, you might have a problem booting GalliumOS. This is due to the Developer Mode boot flag enabling Legacy Boot mode being reset when power is lost - see [https://wiki.galliumos.org/Firmware#crossystem crossystem flags]. 
  
'''Firmware Flashing'''
+
This is easily fixable, but it's preferable to avoid the issue entirely by either setting the corresponding firmware boot flag (which is not reset when power is lost), or by flashing custom Full ROM firmware - see [[Firmware]]
You may need to flash your firmware. This depends on whether your device came with Seabios (Legacy Boot) or not.
 
For more info see https://johnlewis.ie/custom-chromebook-firmware/rom-download/ and https://github.com/MattDevo/scripts.
 
  
# Enable [http://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Developer Mode]
+
=== chrx Installation ===
# Download a GalliumOS [https://galliumos.org release] or [https://ci.galliumos.org/builds nightly] ISO
 
# Write ISO to your removable USB or SD media using <code>dd</code> or Rufus
 
## <code>dd</code> on Linux or Mac OSX
 
### From Linux or ChromeOS: <code>sudo dd if=galliumos.iso of=/dev/sdb bs=1M</code>  where <code>galliumos.iso</code> is the iso file you downloaded and <code>/dev/sdb</code> is the usb device you want to write it to
 
### From Mac OSX: <code>sudo dd if=galliumos.iso of=/dev/sdb bs=1m</code>
 
## Rufus on Windows
 
### Select the GalliumOS iso, the usb drive you want to use, and then click start.
 
# Insert USB or SD media into Chromebook
 
# Reboot Chromebook and press <code>CTRL+L</code> at the white "OS verification is OFF" screen
 
# Follow GalliumOS installer
 
  
== From the command line ==
+
Installing GalliumOS via [https://chrx.org/ chrx] allows you to dual-boot GalliumOS alongside ChromeOS. Check the [https://chrx.org/#compatibility chrx hardware compatibility list] to see if your device supports chrx, and whether any preparation steps are required.
  
Installing from the command line via [https://chrx.org/ chrx] will give you a dual-boot machine, GalliumOS and ChromeOS.
+
See [https://chrx.org#usage chrx installation instructions] for full details, but here's a quick overview:
  
Note that chrx only works with certain Chromebook models, so be sure to review the [https://chrx.org/#compatibility hardware compatibility list].
+
# Prepare your ChromeOS device: see [[Installing/Preparing]]
 +
# Boot device into ChromeOS and configure networking; you do not need to log in
 +
# Switch to a virtual terminal by pressing <code>Ctrl</code>+<code>Alt</code>+<code>F2(top row right arrow)</code>, then log in as user <code>chronos</code> with no password
 +
# Run chrx: <code>cd ; curl -O <nowiki>https://chrx.org/go</nowiki> && sh go</code> (see [https://chrx.org/#options chrx docs] for additional options)
 +
# Follow on-screen prompts to repartition your SSD and install GalliumOS. If this is the first time running chrx on this ChromeOS machine, chrx will reboot after the partitioning step and you will need to continue the installation by running chrx again with the same command line.
 +
# After reboot, at the white "OS verification is OFF" screen, press <code>Ctrl</code>+<code>L</code> for GalliumOS, or <code>Ctrl</code>+<code>D</code> for ChromeOS
  
# Enable [http://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Developer Mode]
+
== Additional Software ==
# Reboot Chromebook and press <code>CTRL+D</code> at the white "OS verification is OFF" screen
+
[[Additional_Software|Additional Software for GalliumOS]]
# Configure Wi-Fi if necessary
+
 
# Press <code>CTRL+ALT+F2</code> to get a virtual terminal, then log in as user <code>chronos</code> with no password
+
== Developer Installation ==
# Run chrx with <code>curl -O https://chrx.org/go && sh go -d galliumos</code> (see [https://chrx.org/#options chrx.org] for more options)
+
 
# Follow on-screen instructions to repartition your SSD and to install GalliumOS
+
You can install GalliumOS as a virtual machine in order to do user-space software development and testing. Obviously hardware-specific issues will not be debuggable in these environments.
 +
 
 +
* [[Installing/VirtualBox | VirtualBox]]
 +
* [[Installing/VMWareFusion | VMWare (Fusion)]]

Latest revision as of 02:53, 8 April 2020

General Install Instructions

There are two methods for installing GalliumOS:

  1. From an ISO image on a USB drive or SD card
    This method enables you to entirely replace ChromeOS on your Chromebook's internal storage (SSD, eMMC, or NVMe).
    It also allows the possibility of more complex configurations such as dual-booting alongside Windows or other Linux distributions (these are outside of the scope of these instructions however).
  2. From the ChromeOS command-line using chrx
    This method will configure your device to dual-boot GalliumOS alongside ChromeOS. chrx can install GalliumOS to your Chromebook's internal storage, as well as to external USB/SD devices.

See Hardware Compatibility to verify the requirements, limitations, and installation options available for your ChromeOS device model.

Traditional ISO Install

The traditional ISO install method allows you to use your entire SSD or HDD for GalliumOS. You will need to use a USB flash drive or SD card, and your Chromebook will need to support either Legacy Boot Mode or have UEFI firmware available. You can even boot the GalliumOS Live image to try out the features of GalliumOS before you decide to install!

  1. Go to Installing/Preparing and get your Chromebook ready to run GalliumOS
  2. Download the appropriate GalliumOS ISO for your device
  3. Write (or "burn") the ISO to a USB flash drive or an SD card
  4. Plug your USB flash drive or SD card into your Chromebook
  5. Reboot your Chromebook and boot from the USB flash drive or SD card
    • If you have the white "OS verification is OFF" screen, press Ctrl+L
    • If you have installed custom firmware, press Esc at the BIOS screen and select the USB device
  6. Wait for GalliumOS to boot up. Once in the live environment you can play around with GalliumOS, or you can install it using the Install GalliumOS icon on the desktop
  7. After reboot, press Ctrl+L to access GalliumOS (this requirement can be bypassed for single-boot on most models, see Firmware)

Important: If you choose an ISO install of GalliumOS (thus removing ChromeOS), and choose to use the Legacy Boot Mode of the stock firmware (ie, with the stock or updated RW_LEGACY firmware), and you allow your battery to drain completely, you might have a problem booting GalliumOS. This is due to the Developer Mode boot flag enabling Legacy Boot mode being reset when power is lost - see crossystem flags.

This is easily fixable, but it's preferable to avoid the issue entirely by either setting the corresponding firmware boot flag (which is not reset when power is lost), or by flashing custom Full ROM firmware - see Firmware

chrx Installation

Installing GalliumOS via chrx allows you to dual-boot GalliumOS alongside ChromeOS. Check the chrx hardware compatibility list to see if your device supports chrx, and whether any preparation steps are required.

See chrx installation instructions for full details, but here's a quick overview:

  1. Prepare your ChromeOS device: see Installing/Preparing
  2. Boot device into ChromeOS and configure networking; you do not need to log in
  3. Switch to a virtual terminal by pressing Ctrl+Alt+F2(top row right arrow), then log in as user chronos with no password
  4. Run chrx: cd ; curl -O https://chrx.org/go && sh go (see chrx docs for additional options)
  5. Follow on-screen prompts to repartition your SSD and install GalliumOS. If this is the first time running chrx on this ChromeOS machine, chrx will reboot after the partitioning step and you will need to continue the installation by running chrx again with the same command line.
  6. After reboot, at the white "OS verification is OFF" screen, press Ctrl+L for GalliumOS, or Ctrl+D for ChromeOS

Additional Software

Additional Software for GalliumOS

Developer Installation

You can install GalliumOS as a virtual machine in order to do user-space software development and testing. Obviously hardware-specific issues will not be debuggable in these environments.