|
|
| Line 1: |
Line 1: |
| − | You can install GalliumOS in two different ways:
| + | please delete |
| − | | |
| − | * '''From USB or SD media''', downloaded from https://ci.galliumos.org/builds
| |
| − | * '''From the commmand line''' on a ChromeOS virtual terminal, via [https://chrx.org/ chrx]
| |
| − | | |
| − | Both methods require [http://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Developer Mode] enabled on your ChromeOS device.
| |
| − | | |
| − | '''TODO: flesh this out!''' Depending on your Chromebook model, you might need to flash your firmware to enable Legacy Boot. ROMs and instructions at https://johnlewis.ie/custom-chromebook-firmware/rom-download/.
| |
| − | | |
| − | == From USB or SD media ==
| |
| − | | |
| − | Installing from USB or SD media allows you to use your entire SSD for GalliumOS.
| |
| − | | |
| − | # Enable [http://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Developer Mode]
| |
| − | # Reboot Chromebook and press CTRL+L at the white "OS verification is OFF" screen
| |
| − | # Download the newest ISO from https://ci.galliumos.org/builds
| |
| − | # Write ISO to your removable USB or SD media
| |
| − | # Insert USB or SD media into Chromebook
| |
| − | # Follow GalliumOS installer
| |
| − | | |
| − | == From the command line ==
| |
| − | | |
| − | Installing from the command line via [https://chrx.org/ chrx] will give you a dual-boot machine, GalliumOS and ChromeOS. Note that chrx only works with certain Chromebook models, so be sure to review the hardware compatibility list on the chrx site.
| |
| − | | |
| − | # Enable [http://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Developer Mode]
| |
| − | # Reboot Chromebook and press CTRL+D at the white "OS verification is OFF" screen
| |
| − | # Configure Wi-Fi if necessary
| |
| − | # Press <code>CTRL+ALT+F2</code> to get a virtual terminal, then log in as user <code>chronos</code> with no password
| |
| − | # Run chrx with <code>curl -O https://chrx.org/go && sh go -d galliumos</code> (see https://chrx.org/ for more options)
| |
| − | # Follow on-screen instructions to repartition your SSD and to install GalliumOS
| |
