Difference between revisions of "FAQ/Troubleshooting"

Revision as of 17:16, 8 February 2017

This page contains resources and answers to common issues related to installation, maintenance, and usage of GalliumOS.

I accidentally reenabled OS verification and now I can't boot into gallium. What now?

If you are using RW_LEGACY firmware and you have not disabled the GBB flags. You can check some crossystem settings from the boot screen with ctrl+T.

Additionally, you can reset the crossystem flags by using a custom recovery image for your model and following the README.

This question was resolved on reddit.

Here are some quick commands to try.

If you just want to start from scratch:

sudo apt-get install --reinstall galliumos-baytrail

If you haven't changed your audio config:

rm -rf $HOME/.config/pulse

@@ Line 3: / Line 3: @@
 == Bootup Issues ==
-; I accidentally reenabled Chrome's OS Verification and now I can't boot. What now?
+; I accidentally reenabled OS verification and now I can't boot into gallium. What now?
-If you are using RW_LEGACY firmware and you have not disabled the GBB flags. You can check some crossystem settings from the boot screen with CTRL+T.
+If you are using RW_LEGACY firmware and you have not disabled the GBB flags. You can check some crossystem settings from the boot screen with ctrl+T.
 Additionally, you can reset the crossystem flags by using a [https://galliumos.org/fixflags/ custom recovery image] for your model and following the [https://galliumos.org/fixflags/README README].